Products
-
AS/NZS 3599 Standard MV ABC Aerial Bundled Cable
AS/NZS 3599—Electric cables—Aerial bundled— Polymeric insulated—Voltages 6.3511 (12) kV and 12.722 (24) kV
-
IEC/BS Standard 12.7-22kV-XLPE Insulated MV Middle Voltage Power Cable
Suitable for energy networks such as power stations. For installation in ducts, underground and outdoor.
The cables made to BS6622 and BS7835 are generally supplied with Copper conductors with Class 2 rigid stranding. Single core cables have aluminium wire armour (AWA) to prevent induced current in the armour, whilst the multicore cables have steel wire armour (SWA) providing the mechanical protection. These are round wires that provide over 90% coverage.
Please note: Red outer sheath can be prone to fading when exposed to UV rays.
-
60227 IEC 01 BV Building Wire Single Core Non Sheathed Solid
Single-core Non-sheath with rigid conductor cable used for general purposes.
-
AS/NZS standard 12.7-22kV-XLPE Insulated MV Power Cable
Electricity distribution or sub-transmission networks cable typically used as primary supply to Commercial, Industrial and urban residential networks. Suitable for high fault level systems rated up to 10kA/1sec. Higher fault current rated constructions are available on request.
Custom designed Medium Voltage cables
For efficiency and longevity, every MV cable should be tailored to the installation but there are times when a truly bespoke cable is needed. Our MV cable experts can work with you to design a solution that matches your requirements. Most commonly, customisations affect the area size of the metallic screen, which can be adjusted to change the short circuit capacity and earthing provisions.In every case, the technical data is provided to demonstrate suitability and the specification honed for manufacture. All customised solutions are subject to enhanced testing in our MV Cable Testing Facility.
Contact the team to speak to one of our specialists.
-
SANS1507-4 standard PVC Insulated LV Power Cable
For fixed installation of the transmission and distribution systems, tunnels and pipelines and other occasions.
For situation not supposed to bear external mechanical force.
-
Single Core PV Solar Cable
For the cabling between the solar modules and as extension cable between the module strings and the DC/AC inverter
-
ASTM UL Thermoplastic High Heat Resistant Nylon Coated THHN THWN THWN-2 Wire
THHN THWN THWN-2 Wire are suitable for use as machine tool, control circuit, or appliance wiring. Both THNN and THWN have PVC insulation with nylon jackets. The thermoplastic PVC insulation makes THHN and THWN wire have flame-retardant properties, while the nylon jacketing also adds resistance to chemicals such as gasoline and oil.
-
IEC/BS Standard 18-30kV-XLPE Insulated MV Middle Voltage Power Cable
The single core cables are designed for distribution of electrical power with nominal voltage Uo/U ranging from 3.8/6.6KV to 19/33KV and frequency 50Hz. They are suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switchboards and power stations.
-
60227 IEC 02 RV 450/750V Single Core Non Sheathed Flexible Building Wire
Single core flexible conductor unsheathed cable for general purposes
-
AS/NZS standard 19-33kV-XLPE Insulated MV Power Cable
Electricity distribution or sub-transmission networks cable typically used as primary supply to Commercial, Industrial and urban residential networks. Suitable for high fault level systems rated up to 10kA/1sec. Higher fault current rated constructions are available on request.
MV Cable Sizes:
Our 10kV, 11kV, 20kV, 22kV, 30kV and 33kV cables are available in the following cross-sectional size ranges (depending on Copper/Aluminium conductors) from 35mm2 to 1000mm2.
Larger sizes are often available upon request.
-
SANS1507-4 standard XLPE Insulated LV Power Cable
High conductivity bunched, Class 1 Solid conductor, Class 2 stranded copper or aluminium conductors, insulated and color coded with XLPE.
-
Central Stainless Steel Loose Tube OPGW Cable
OPGW optical cables are mainly used on 110KV, 220KV, 550KV voltage level lines, and are mostly used in newly-built lines due to factors such as line power outages and safety.